Industrial Water Purification Equipment User Guide:

1.This equipment is an integrated system of high-voltage electricity and pressure vessels, and must be operated and maintained by certified professionals.

2.Before performing any maintenance, operators must cut off the power supply and depressurize the pump units and piping.

3.During chemical cleaning, operators must wear acid- and alkali-resistant gloves, safety goggles, and protective clothing.

4.Site Requirements: The floor should be flat and load-bearing, and a drainage channel must be in place. The ambient temperature should be maintained at 5-40°C, and direct sunlight must be avoided.

5.Piping Connections: Operators should connect the raw water, product water, concentrate, and cleaning return lines as marked on the drawings. All piping materials used must be corrosion-resistant.

Commercial Water Purification Equipment User Guide:

1.The equipment must use a 220V/50Hz AC power supply and be connected to a reliably grounded socket with a rated current of at least 10A. The use of power strips or extension cords to connect high-power equipment is strictly prohibited.

2.The equipment should be placed on a flat, dry, level surface, at least 15 cm away from the wall to facilitate heat dissipation.

3.After initial installation or after a long period of disuse, the equipment needs to be drained 2 to 3 times.

Household Water Purification Equipment User Guide:

1.This equipment is only to be used with municipal tap water as the source; connection to hot water is strictly prohibited.

2.The equipment's operating environment temperature must be maintained between 5-38°C, and it must be kept away from direct sunlight and heat sources such as heating furnaces.

3.After installation, the user must ensure there are no potential water leaks inside the cabinet, and the entire unit's piping must not be bent or kinked.